The Ultimate All - in - One Home Chain Waxing System is a compact kit designed for you to wax your chains at home. With this kit, you can achieve the cleanest, quietest, and most efficient drivetrain possible. It includes a wax warmer, a drip stand, and a cable coupler. The wax warmer comes with a vented clear lid. This lid helps to keep the heat in while allowing you to easily check if the wax is fully melted. It's the perfect partner for StripChip, enabling you to wax your chain in a single step without using degreaser. The chain hanging stand provides a mess - free drying process. You can let the excess wax drip back into the pot for future use. Its notched base keeps the melter in place and holds the chain coupler firmly. The chain coupler has a steel cable threaded on one side. You can loop it through your chain and secure it on the other side. This way, you can dip, agitate, and hang the chain without getting wax on unwanted areas or touching the hot wax pot.
Using this chain waxing system is a breeze. First, put the wax in the wax warmer. With the vented clear lid on, turn on the warmer and wait until the wax is fully melted. You can easily check through the lid. Once the wax is melted, use the chain coupler. Thread the steel cable through your chain and secure it. Then, dip the chained - up chain into the melted wax. Move it around a bit to make sure the wax covers every part of the chain. After that, hang the chain on the chain hanging stand. Let the excess wax drip back into the pot. This stand has a notched base that keeps everything stable. When it comes to maintenance, keep the wax warmer clean after each use. Make sure to wipe off any wax residue. Store the chain coupler and the stand in a dry place. As for safety, always be careful when dealing with hot wax. Don't touch the hot wax pot directly. Also, make sure the area where you're using the system is well - ventilated, especially when the wax is melting.
