Finish Line Dry Lube stands as the pioneer and most adaptable dry - style chain lubricant in the bicycle industry. It's crafted with high - performing nano - ceramic boron nitride. This Non - Stick Ceramic Technology, completely fluoro - free, forms a dry 'wax - like' film. It repels grime and offers a low friction coefficient over long intervals between re - lubrication. Ideal for both on - road and off - road cycling, it thrives in dry, dirty, and dusty settings and also performs well in wet conditions. Designed mainly for chains, it can also be used on derailleurs, shifters, cables, and brake pivot points. It maximizes drivetrain efficiency without attracting too many abrasive contaminants.
To use this Finish Line Dry Lube, first clean your bike chain and the other parts you plan to lubricate thoroughly. Make sure they are dry before applying the lube. Then, apply a thin layer of the lube evenly along the chain, derailleurs, shifters, cables, and brake pivot points. Let it sit for a few minutes so it can penetrate well. After that, wipe off any excess lube with a clean cloth. As for maintenance, re - apply the lube after every 100 - 150 miles of riding or more often if you ride in really dirty or wet conditions. Always keep the lube in a cool, dry place and away from direct sunlight. Avoid getting it in your eyes or on your skin. If it does happen, rinse thoroughly with water.
