Using our Highly Reflective Tenacious Fabric Tape is a breeze. First, pick the item you want to add reflectivity to, like a jacket or a bike helmet. Clean the surface where you'll stick the tape to make sure it adheres well. Then, peel off the backing from the tape or pre - cut patch and firmly press it onto the surface. Press down hard all around to ensure there are no air bubbles. When it comes to maintenance, this tape can handle both wet and dry conditions, so you don't have to worry too much. But if it gets dirty, you can gently wipe it with a damp cloth. Just be careful not to use harsh chemicals as they might damage the reflective properties. Also, avoid pulling or tugging on the tape too much to prevent it from peeling off prematurely.
